Master Chroma Co2300 - Orange 2300 Paint – Custom Mixed to Order

Master Chroma Co2300 - Orange 2300 Paint
Colour preview Master Chroma Co2300 - Orange 2300 Paint
Custom mixed Made to order
Fast delivery UK delivery
Professional finish Quality paint

Configure your paint

Choose your options below to create the finish you need.

Additives
Extras
500ml Grey Primer + £8.99
500ml Clear Lacquer + £8.99
500ml White Primer + £8.99
Gloves + £0.99

Product Code: SDK 11381

Availability: In Stock

Product Description

Master Chroma Co2300 - Orange 2300 is available from the Master Chroma Colour Chart, with custom-mixed options for projects where an identified colour needs to be reproduced in a suitable paint system.

Master Chroma Co2300 - Orange 2300 can be configured for the job rather than being limited to a single paint specification. Select from Cellulose, Acrylic Enamel or Synthetic Enamel, along with the applicable 1K, 2K and 2K Air-Dry systems shown above.

Gloss is selectable from a completely matt 0% finish through to 90% Full Gloss, allowing you to choose both the colour and sheen. Available pack sizes and formats are listed in the configurator for this product.

Where your project needs additional protection, the available options may include UV Protection and High Resistance. Aerosol cans also feature an adjustable vari-nozzle designed to give you more control over the width of the spray pattern.

Frequently Asked Questions

That depends on the surface and paint system you're using. Some coatings can be applied directly to particular materials, while others require a suitable primer for adhesion and an even finish. Check the product information for your chosen system before starting.

The surface should generally be clean, dry and free from grease, loose paint, dust and contamination. Any damaged areas should be repaired and the surface prepared appropriately before primer or top coat is applied. Good preparation usually makes a noticeable difference to the final result.

Build the finish gradually with light, even passes rather than trying to achieve full coverage in one heavy coat. Keep the can moving while spraying and allow the recommended flash or drying time between coats. Applying too much paint in one area is one of the most common causes of runs.

Before applying your paint: because each colour is mixed to order, we recommend carrying out a small test first and checking that the colour and finish are suitable for your project. If you have any concerns, please get in touch before applying the paint more widely.

A colour viewed on a phone, tablet or monitor may not look exactly the same as the physical paint. Screen calibration, brightness and lighting conditions can all influence the way a shade is displayed.